![background image](http://html1.mh-extra.com/html/daum-electronic/8008-trs3/8008-trs3_user-manual_514129054.webp)
Fine tuning
ergo bike
Loosen the tensing button to change the inclination
angle of the handlebars. After you bring the
handlebars to the required inclination retighten
the tensing button back again.
As a way to achieve an optimal training
position, we recommend you start by
adjusting the saddle to the appropriate
height, and then adjusting the handlebars
to the same height.
The dashboard column can be adjusted in
numerous ways making it easy to find a
comfortable posture.
Loosen the articulation screws on the side
and front to change the setting of the column.
*the devices shown in the illustrations
are equipped with the SWING FEET;
this optional accessory is sold separately.
*
SW 6
52
Loosen the toggle button and the screw
to adjust the height of the handlebars.
As with a racing bike, your back should be in an ergonomic position and your legs should be slightly
bend at the pedal lowest (bottom) position. The figure to the left illustrates this posture.
360mm
Loosen both nuts under the saddle to modify the inclination of the saddle.
Retighten both nuts when the saddle is in the required position.
13
15
14
15
The sitting position is adjusted by means of the
sliding rail on the saddle support. For this you
should loosen the button underneath the rail,
bring the saddle in the required horizontal
position and finally retighten the button again.
If the ergo_bike is installed on an uneven floor,
use a screwdriver to adjust the compensation
setting in the front feet to ensure a stable stand.
Front Foot
Front
With compensation setting
for the floor distance.
To adjust the saddle height, loosen and
pull the toggle button. Move the saddle
column to the required height. Release
the toggle button and let lock into position
and then retighten it.
Summary of Contents for 8008 TRS3
Page 1: ...8008 TRS3 3 3 User Manual ...
Page 59: ......