![background image](http://html1.mh-extra.com/html/daum-electronic/8008-trs3/8008-trs3_user-manual_514129050.webp)
Release the fastening screw and the
toggle button and insert the handlebars
column in the frame.
Pull the dashboard cable through the handlebars column towards the lower end
and let it fall through the frame to the ground.
Plug the connector of the dashboard
cable into the connector of the device cable.
Assembling the handlebars column
48
Wrapping the racing handlebars
ergo bike
ergo bike
ergo bike
The included handlebar wrapping tape (7a) is used to wrap the handlebar (7) to provide a better hold
and an adequate sweat absorbing material.
Wrapping should start at each end of the handlebar. Follow the indicated wrapping direction (see fig. 1).
Fig. 3
Wrapping
direction
7a
Fig. 2
Remove the
protective sheet
7a
Fig. 1
Centre ring
Wrapping limit
(mark)
7
Fig. 4
Attach the tape ends
with adhesive
tape!
Fig. 5
7a
Press the beginning of the handlebars tape (7a) onto the bar end with the
sticky side down. A narrow strip should protrude from the tube. Push this
strip inside the handlebars tube (7) with the end cap.
Secure the other end of the handlebar tape (after cutting any excess length)
with adhesive tape to prevent it from unwinding.
Wrap the other side of the handlebar in the same way (only in the opposite
direction). Insert the end caps into the tube extremities of the handlebars,
pushing the overhanging tape ends into the tube.
7
1.
2.
3.
Summary of Contents for 8008 TRS3
Page 1: ...8008 TRS3 3 3 User Manual ...
Page 59: ......