![background image](http://html1.mh-extra.com/html/daum-electronic/8008-trs3/8008-trs3_user-manual_514129005.webp)
Dashboard windows
watt
The heart rate displays the heart rate. When only the upward pointing arrow is
displayed in the middle, then this means that the heart rate is too low to ensure
an effective training. Inversely, when only the downward pointing arrow is
displayed then the heart rate is too high. If the arrow starts blinking then the
load is too high and the user should moderate the training.
Speed and distance window: this window shows the actual speed or the
corresponding distance covered. Pressing the control button switches back
and forth between these two values. See page 5.
The RPM display indicates the velocity in revolutions per minute.
(+ = pedal faster, - = pedal slower)
The watt window shows the load in watt. The displayed watt value will blink to
indicate reaching either the watt load limit of the device or the watt load limit of
the user. It also shows the relax value with relaxation exercises.
You can individually set up which data you whish to view: clock, training time,
speed, distance or dissipated energy (in kJoule). You can switch back and forth
with a second display by pressing the control button. See page 5
The user specifies the user number (1 to 4 or guest 0)
The graphic screen displays the programs. The load (in watt) is shown on the
scale on the left side of the screen. The training time is shown on the lower axis.
In heart rate controlled programs the system displays e.g. 100 beats per minute
at the 200 watt position on the screen scale.
In the height profile programs the time axis indicates the distance in km while
the watt axis indicates the height profile.
Note: the illustrations may be changed without notice!
13:08
3
250
0.0
+
0
128
OK
3
Summary of Contents for 8008 TRS3
Page 1: ...8008 TRS3 3 3 User Manual ...
Page 59: ......