Datex-Ohmeda Anesthesia Delivery Unit S/5 Technical Reference Manual Download Page 15

Page: 15 / 494

About this manual

Document No. 8502852

1-1

1 ABOUT THIS MANUAL

This Technical Reference Manual contains information required to service and repair the Datex-

Ohmeda S/5 Anesthesia Delivery Unit and AS/3 Anesthesia Delivery Unit from ID: No 40 000 000

and onwards. It is intended for service personnel and engineers who will perform service and

maintenance procedures.
Throughout this manual the S/5 Anesthesia Delivery Unit and AS/3 Anesthesia Delivery Unit will be

referred to as the ADU.
The file is divided into sections from 1 to 10 concerning maintenance, and into sections from A to D

concerning the ADU modules.
The complete file has a document number shown at the first page, used for example when ordering a

copy. The sections 1-10 together have a document number shown in the footer, as well as chapter A,

B, C and D. This is to simplify the updating process in the future.

Disclaimer

The manufacturer reserves the right to make changes in product specifications without prior notice.

The information in this manual is believed to be accurate and reliable; however, the manufacturer

assumes no responsibility for its use.

Related documents

In addition to this Technical Reference Manual, the following documents are available for the ADU.

Open me first

The

“Open me first”

package is located in the delivery package and includes unpacking instructions

and the

“ADU Production Card”

, which must be saved in your device history records. The Production

Card includes for example, all the necessary order, version and serial number information.

User's Reference Manual

The

“User's Reference Manual”

contains detailed instructions and references for operating the ADU.

Everyday cleaning and maintenance procedures as well as simple troubleshooting hints are also

included.

System guide

The

“System guide”

provides information on how to select products for configuring

a delivery system that fulfils specific needs.

Spare part installation instructions

This manual does not include all instructions for installation of spareparts. Detailed instructions are

generally enclosed to the sparepart packages.

Definition of text styles

Names of touch keys are entered in a larger and bold typeface, for example

Setup

Software menu items are entered in bold italic typeface, for example

Checks.

Menu access is described from top to bottom. For example, the selection of the

Start test

command

from the

Display

submenu of the

Checks

menu, would be written as

Checks-Display-Start test

Messages (alarm messages, informative messages) displayed on the screen are entered inside single

quotes, for example ‘Please wait’.

Summary of Contents for Anesthesia Delivery Unit S/5















































































































































































































































































































































































































































































































Search results

Summary of Contents for Anesthesia Delivery Unit S/5

Reviews:

Brands by name

Popular brands

Datex-Ohmeda Anesthesia Delivery Unit S/5, Technical Reference Manual

Search results

Summary of Contents for Anesthesia Delivery Unit S/5

Reviews:

Brands by name

Popular brands