3.
4.
5.
1.
Remove the jumper X10-1.
e
3
0
b
g
4
7
3
.1
0
Close the cover of the AC drive. For the tightening torques of the screws, see
12.5 Tightening Torques for Cover Screws
Using the Product Modified Label
). If the label is not yet attached, attach it on the drive near the nameplate.
6.6.2 Installing the AC Drive in an IT System, FR7
Use these instructions to change the EMC protection of the AC drive to level C4.
Open the cover and the cable cover of the AC drive as instructed in
6.4.4 Get Access and Locate the Terminals for FR7/FI7
Procedure
Open the power unit cover of the AC drive.
e
3
0
b
g
0
9
7
.1
0
AQ275638903263en-000601 / DPD00910
84 | Danfoss A/S © 2022.12
Electrical Installation
VACON® NXS/NXP Air-cooled
Operating Guide