1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
-
-
Code
Function
Min
Max
Unit
Default
Cust Description
I6.8.5.3
Info: Brake chopper
–
–
–
–
–
I6.8.5.4
Info: Brake resistor
–
–
–
–
–
S6.8.6
Expander boards
–
–
–
–
–
S6.8.7
Debug menu
–
–
–
–
For Application program-
ming only. Speak to the
factory to get instructions.
8.7.3 Changing the Language
Use these instructions to change the language of the control panel. The possible languages are different in all language packages.
Procedure
In the
System
menu (
M6
), find the
Language
selection page (
S6.1
) with the Browser buttons.
To go to the edit mode, push the Menu button Right.
The name of the language starts to blink.
To select the language for the control panel texts, use the Menu buttons Up and Down.
To accept the selection, push the [enter] button.
The name of the languages stops to blink and all text information on the control panel shows in the selected lan-
guage.
8.7.4 Changing the Application
The application can be changed in the
Application
selection page (
S6.2
). When the application is changed, all parameters are reset.
For more information on the Application Package, see VACON
®
NX All in One Application Manual.
Procedure
In the
System
menu (
M6
), find the Application selection page (
S6.2
,
Application
) with the Browser buttons.
Push the Menu button Right.
To go to the edit mode, push the Menu button Right.
The name of the application starts to blink.
Scroll through the applications with the Browser buttons and select a different application.
To accept the selection, push the [enter] button.
The AC drive starts again and goes through the set-up.
When the display shows the question
Copy parameters?
, there are 2 options:
This question shows only if the parameter
P6.3.4 Parameter back-up
is set to
Yes
.
To upload the parameters of the new application to the control panel, select
Yes
with the Browser buttons.
To keep the parameters of the application that was last used in the control panel, select
No
with the Browser buttons.
8.7.5 Copy Parameters (S6.3)
Use this function to copy parameters from one AC drive to a different AC drive or to save parameter sets in the internal memory of
the AC drive.
Stop the AC drive before copying or downloading parameters.
AQ275638903263en-000601 / DPD00910
108 | Danfoss A/S © 2022.12
Using the Control Panel
VACON® NXS/NXP Air-cooled
Operating Guide
