manualshive.com logo in svg

Danfoss VACON NXS Air-cooled, Operating Manual

Share
Download
Danfoss VACON NXS Air-cooled Operating Manual Download Page 69

7.

8.

1.
2.

-
-
-

Attach the grounding clamps for control cable on the grounding level with M4x16 screws. Use the clamps delivered in the
accessories bag. Use the clamps to ground the control cables. Connect the control cables.

1

2

e

3

0

b

g

0

7

4

.1

0

Illustration 30: FR8/FI8

1

Standard

2

PROFIBUS

Attach the cover of the drive. For the tightening torques of the screws, see 

12.5 Tightening Torques for Cover Screws

.

6.5.5 Installing the Cables, FR9

Follow these instructions to install the cables.
For information on how to comply with the UL regulations in cable installations, see 

6.1.2 UL Standards on Cabling

.

If it is necessary to connect an external brake resistor, see VACON

®

 Brake Resistor Manual. See also 

8.7.8.2 Setting the Internal Brake

Resistor Connection

.

Make sure that the delivery contains all necessary components.
Open the covers according to instructions in 

6.4.6 Get Access and Locate the Terminals for FR9

.

Procedure

Strip the motor cable, the mains cable, and the brake resistor cable. See 

12.4 Cable Stripping Lengths

To move the cables through grommets, cut them open.

Do not cut the grommet openings wider than what is necessary for the used cables.
If the grommets fold in when putting the cable, pull the cable back to make the grommets straight.
Cable gland can be used if preferred.

AQ275638903263en-000601 / DPD00910 | 69

Danfoss A/S © 2022.12

Electrical Installation

VACON® NXS/NXP Air-cooled

Operating Guide

Summary of Contents for VACON NXS Air-cooled





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands