Danfoss VACON NXS Air-cooled, Operating Manual

Page: 7 / 196

8.7.8.6
8.7.8.7
8.7.8.8
8.7.8.9
8.7.9
8.7.9.1
8.7.9.2
8.7.9.3
8.7.9.4
8.7.9.5
8.7.9.6
8.7.9.7
8.7.9.8
8.7.9.9
8.7.9.10
8.8
8.8.1
8.8.2
8.8.3
8.9
9
9.1
9.2
9.3
9.3.1
9.3.2
9.3.3
9.4
9.4.1
9.4.2
9.4.2.1
9.4.2.2
9.4.3
9.4.4
10
10.1
10.2
Changing the HMI Acknowledge Timeout 115
Changing the Number of Retries to Receive HMI Acknowledgement (P6.7.4) 115
Sine Filter (P6.7.5) 115
Pre-charge Mode (P6.7.6) 116
System Info 116
Finding the System Info Menu 116
Total Counters (S6.8.1) 116
Trip Counters (S6.8.2) 116
Resetting the Trip Counters 116
Software (S6.8.3) 117
Applications (S6.8.4) 117
Examining the Application Page 117
Hardware (S6.8.5) 117
Checking the Status of an Option Board 118
Debug Menu (S6.8.7) 118
Using the Expander Board Menu 118
Expander Board Menu 118
Examining the Connected Option Boards 118
Finding the Option Board Parameters 119
Further Control Panel Functions 119
Commissioning 120
Safety Checks before Starting the Commissioning 120
Commissioning the AC Drive 121
Measuring the Cable and Motor Insulation 121
Insulation Checks of the Motor Cable 121
Insulation Checks of the Mains Cable 122
Insulation Checks of the Motor 122
Checks after Commissioning 122
Testing the AC Drive after Commissioning 122
RUN Test without Load 123
Test A: Controls from the Control Terminals 123
Test B: Control from the Keypad 123
Start-up Test 123
Identification Run 123
Maintenance 124
Preventive Maintenance Recommendations 124
Reforming the Capacitors 126
AQ275638903263en-000601/DPD00910 | 7 Danfoss A/S © 2022.12
Contents
VACON® NXS/NXP Air-cooled
Operating Guide