Daikin RXL25G2V1B, Service Manual

Page: 69 / 294

SiENBE04-925_A Operation Manual
Operation Manual 55
„
To start 3-D Airflow
1. 3. Press the “SWING button ” and the “SWING button ”:
the “ ” and “ ” display will light up and the flap and louvers will move in turn.
„
To cancel 3-D Airflow
2. 4. Press either the “SWING button ” or the “SWING button ”.
„
COMFORT AIRFLOW operation
• Check COMFORT AIRFLOW operation in the section of COMFORT AIRFLOW Operation
and “INTELLIGENT EYE Operation”
Notes on flaps and louvers angles
• When “SWING button” is selected, the flaps swinging range
depends on the operation mode. (See the figure.)
Three-Dimensional (3-D) Airflow
• Using three-dimensional airflow circulates cold air, which tends
to collected at the bottom of the room, and hot air, which tends
to collect near the ceiling, throughout the room, preventing
areas of cold and hot developing.
„
ATTENTION
• Always use a remote control to adjust the angles of the flaps
and louvers. If you attempt to move it forcibly with hand when it
is swinging, the mechanism may be broken.
• Always use a remote control to adjust the louvers angles. Inside
the air outlet, a fan is rotating at a high speed.
5°
80°
5°
15°
50°
80°
30°
70°
Upper limit
COMFORT AIRFLOW
Lower limit
Stop operation
Upper limit
Lower limit
Upper limit
Lower limit
In HEAT mode
In FAN mode
Stop operation
Stop operation
In DRY mode or
COOL mode
COMFORT AIRFLOW
SIENBE04-925_A_FRONT.pdf 69 24/02/2011 13:53:53