![background image](http://html1.mh-extra.com/html/daikin/erq-series/erq-series_service-manual_4704486118.webp)
ESiEN09-06 A
Test Operation
Test Operation
109
1.2.5 Onsite Settings
1.2.5.1
Onsite Settings with the Power Off
If the COOL/HEAT selector was connected to the outdoor unit, set the dip switch (DS1) on the
outdoor unit PC-board (A1P) to “ON” (it is set to “OFF” when shipped from the factory).
For the position of the dip switch (DS1), see the “Service Precautions” label (see at right) which
is attached to the EL. COMPO. BOX lid.
Warning
Electric Shock Warning
Never perform with the power on.
There is a serious risk of electric shock if any live part is touched.
1.2.5.2
Onsite Settings with the Power On
Use the push button switches (BS1 through BS5) on the outdoor unit PC-board (A1P) to make
the necessary onsite settings.
See the “Service Precautions” label on the EL. COMPO. BOX lid for details on the positions and
operating method of the push button switches and on the onsite setting.
Make sure to record the setting on the accessory “REQUEST FOR THE INDICATION” label.
Warning
Electric Shock Warning
Use an insulated rod to operate the push buttons via the inspection door of EL. COMPO. BOX
lid.
There is a risk of electric shock if you touch any live parts, since this operation must be
performed with the power on.
Summary of Contents for ERQ Series
