2-5
DS35-W00
May. 2007
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
CK22/CK22H
2.1 GENERAL SPECIFICATIONS
Item
Model
Type
Number of cylinders
Bore stroke
Total displacement
Engine gross power
Maximum idle speed
Minimum idle speed
Maximum torque
Combustion chamber
Fuel injection pump
Plunger bore
Governor
Injection type
Injection timing
Injection pressure
Compression ratio
Lubricating system
Lubricating oil filter
Oil relief pressure
Lubricating oil capacity
Engine oil specification
Cooling system
Coolant capacity
Antifreeze
Starting system
Battery
Starting support device
Dynamo for charging
Fuel
Weight (Dry)
Injection order
Direction of rotation
Factory Specification
3C100A
Vertical, water-cooled 4 cycle diesel engine
3
75 X 76 mm
1007 cm
3
, 61.45 cu.in.
22 HP (16.2 kW) / 2,800 rpm.
3,000 rpm
1,000 rpm
63.7 Nm, 6.5 kgf-m, 47 lbs-ft/1,900 rpm
Spherical type, swirl chamber
Bosch type K mini pump
5 mm, 0.197 in.
Centrifugal ball mechanical governor
Indirect injection with pre combination chamber
18° before top dead center
14.2 MPa, 145 kgf/cm
2
, 2,062 psi
21.5 : 1
Forced lubrication by rotor-type pump
Full flow paper filter (cartridge type)
4.5 ~ 5.4 kgf/cm
2
(64 ~ 76 psi)
3.2 (0.84 U.S.gal.)
SAE 15W-40, CD or high or of API grode
Pressurized radiator, forced circulation (with pump)
4.6 (1.21 U.S.gal.)
Ethylene glycol 50% with anti corrosive agent
Electric starting with start motor
12 V, 80AH, Equivalent (CCA, 630AH)
By glow plug in combustion chamber
12 V, 240 W
Diesel fuel No.2-D (ASTM D975)
98 kg, 216 lbs.
1 - 2 - 3
Counterclockwise (wiewed from flywheel side)
•
The engine gross output is measured with the cooling fan removed.
•
The cylinder number for ignition sequence is given from the cylinder on the engine cooling fan side.
•
If the coolant level drops due to its evaporation, add only water. If the coolant level drops due to the leakage, add
coolant mixed with anti-freeze.
•
The freezing point of the coolant mixture is -37°C (-34°F) in a normal condition.
•
When replacing the coolant with a different type of coolant, flush the cooling system thoroughly beforehand.
2. SPECIFICATIONS
ENGINE - SPECIFICATIONS
Summary of Contents for CK22
