Daedong CK22, Workshop Manual

Page: 142 / 372

3-10 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
196W314A
NOTE:
• Do not allow grease and oil on the clutch disc facing.
Item
Clutch mounting screws
Tightening torque
23.5 ~ 27.5 Nm
2.4 ~ 2.8 kgf-m
17.4 ~ 20.3 lb-ft
5.1.9 REMOVING CLUTCH
1. Remove the clutch from the flywheel.
196W312A
(When reassembling)
• Take care of assembly direction. The shorter spline
boss (A) should be located toward flywheel when
assembling clutch disc.
• Take care to treat clutch disc and clean each fiction
surface of flywheel and clutch pressure plate.
(1) Clutch assembly (4) Clutch cover
(2) Bolt (5) Clutch disc
(3) Flywheel (A) Spline boss
196W313A
• When attaching clutch cover (4) and clutch disc
(5) with flywheel, you should set the clutch disc
(5) on the right position. And then, tight bolt equally
to the diagonal.
IMPORTANT
CLUTCH - SERVICING