Daedong CK22, Workshop Manual

Page: 176 / 372

4-32 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
[CK22]
1. Separate the front wheel drive case from the middle
case.
2. Draw out the 18T gear (13) with the bearings (12,
14) on it.
3. Draw out 28T-38T gear (11) with the bearing (10) on
it.
4. Draw out front wheel drive shaft 2 (5) with bearings
(4, 7).
5. Remove the oil seal (3).
(1) Bolt
(2) Front wheel drive case
(3) Oil seal
(4) Ball bearing
(5) Front wheel drive shaft 2
(6) Front wheel drive shifter
(7) Ball bearing
(8) Ball
(9) Spring
(10) Ball bearing
(11) 28T-38T gear
(12) Ball bearing
(13) 18T gear
(14) Ball bearing
196W358A
4.20 DISASSEMBLING THE FRONT
WHEEL DRIVE SHAFT
[CK22H]
1. Separate the front wheel drive case from the HST
case.
2. Draw out the front wheel shift (7), ball (9) and spring
(8).
3. Remove the cir-clip (6) and draw out the front wheel
drive shaft 2 with the bearing and cir-clip (4) on it.
4. Remove the oil seal (3).
(1) Front wheel drive case
(2) Front wheel drive shaft 2
(3) Oil seal
(4) Cir-clip
(5) Ball bearing
196W457A
Item
Front wheel drive as-
sembly mounting bolts
Tightening torque
23.6 ~ 27.4 Nm
2.4 ~ 2.8 kgf-m
17.4 ~ 20.2 lb-ft
(6) Cir-clip
(7) Front wheel shifter
(8) Spring
(9) Ball
Item
Front wheel drive as-
sembly mounting bolts
Tightening torque
23.6 ~ 27.4 Nm
2.4 ~ 2.8 kgf-m
17.4 ~ 20.2 lb-ft
TRANSMISSION - SERVICING