Daedong CK22, Workshop Manual

Page: 339 / 372

11-7 DS35-W00 May. 2007
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
CK22/CK22H
1.3.3 WIRE IDENTIFICATION
A. WIRE CODE
The codes used in wiring diagram represent the size
of wire and the color of insulating cover.
Example) AVS(SS, X) 0.85GR
A: Low-tension cables for automobiles
V: Vinyl insulated
S: Thin-wall type
SS: Very thin-wall type
X: Cross-linked
0.85: Cross sectional area of wire (0.85 mm
2
)
G: Base color of insulating cover
R: Stripe color on the base color
ELECTRIC SYSTEM -
CIRCUIT AND COMPONENT LOCATION
• If the wire color is striped, the base color is given
first, followed by the stripe color as shown below:
Ex) LW = Blue with White stripe
CAUTION
196WA72A
• This table is based on the ambient temperature of
40°C and the allowable current can be slightly
changed by the external factors such as ambient
temperature.
CAUTION
The allowable current for wire is specified by cross
sectional area of wire, and it is marked on the wire
cover. To avoid wire damage, a proper size (sufficient
capacity) of wire for electric load should be used when
installing a optional electric equipment. The thickness
o f w i r e i s d e t e r m i n e d b y c o n s i d e r i n g a m b i e n t
temperature, wire length, current continuity time, and
vibration.
B. WIRE SIZE
(1) Wire (3) Base color
(2) Stripe Color
Allowable current
11 A
14 A
19 A
26 A
37 A
44 A
50 A
60 A
66 A
Specification
AVSS 0.5
AVSS 0.85
AVSS 1.25
AVSS 2.0
AVS 3.0
AVSS 3.0
AVS 5.0
AVSS 5.0
AVS 8.0
2
3
1