Daedong CK22, Workshop Manual

Page: 208 / 372

5-22 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
9 10
11
14
12 13
17
15
16
4.4 HST PEDAL
(1) Rod
(2) Nut
(3) Lever
(4) Nut
(5) Adjust rod
(6) Joint
(7) Plate
(8) HST pedal
(9) Damper assembly
(10) Connector lever 2
(11) Lock arm
(12) Connector plate
(13) Lock shoe
(14) Lock shaft
(15) Connector
(16) Damper cylinder assembly
196W486A
1. Lift rod (1) to take up the free play adjust nuts until
distance (A) is 152 mm (5.984 in.).
Tighten the nuts.
2. Loosen nut (4) and adjust rod (5) until distance (B)
is 163.5 mm (6.437 in.).
Tighten the nut (4).
3. Start the tractor, engage the clutch and put the range
lever in the low or high position and the hydrostatic
lever in the neutral position. Disengage the clutch.
If the tractor moves, stop the tractor and adjust dis-
tance (B) again.
4. Put the joint (6) in the maximum forward travel posi-
tion and then return the lever to 0.5 ~ 1.0 mm (0.0196
~ 0.0393 in.) distance (C).
Adjust the plate (7) until there no clearance between
the pin on joint (6) and plate (7).
Item
Distance (A)
Distance (B)
Distance (C)
Factory Spec.
192 mm
7.559 in.
158 mm
6.22 in.
0.5 ~ 1.0 mm
0.019 ~ 0.039 in.
HST - SERVICING