Daedong CK22, Workshop Manual

Page: 218 / 372

6-10 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
4.3 SEPARATING ROPS AND TIRES
1. Remove the lynch pin (2) and the lock pin (1) from
the ROPS frame.
2. Loosen the lock nuts (3) and remove the pin (4).
3. Place to fix the jacket to the bottom of the rear axle.
4. Remove the nuts & bolts from the wheel.
196W503A
(1) Lock pin (3) Bolt
(2) Lynch pin (4) Pin
4.4 FENDER
1. Remove the joystick mounting bolts and disconnect
the cover (1).
2. Remove the frame (2).
3. Rmove the connect of the rear combi lamp, turn sigal
lamp and working lamp.
4. Remove the ROPS mounting bracket (3).
5. Remove the grip (4) from the levers and then re-
move the lever guide (5).
6. Remove the fender (6).
7. Remove the fender support (7).
NOTE:
• For installation, follow the same procedure in re-
verse order.
196W504A
(1) Cover
(2) Frame
(3) ROPS mounting
bracket
(4) Handle grip
(5) Lever guide
(6) Fender
(7) Fender support
Item
ROPS lock
bolt
Rear Wheel
Blot
Tightening torque
48.1 ~ 55.8 Nm
4.9 ~ 5.7 kgf-m
35.5 ~ 41.2 lb-ft
215 Nm
22 kgf-m
160 lb-ft
Spec.
M10
M16
Item
Fender
support bolt
ROPS
support bolt
Tightening torque
77.5 ~ 90.1 Nm
7.9 ~ 9.2 kgf-m
57.2 ~ 66.5 lb-ft
124 ~ 147 Nm
12.6 ~ 15.0 kgf-m
91.2 ~ 108 lb-ft
Spec.
M12
M14
REAR AXLE - SERVICING