Daedong CK22, Workshop Manual

Page: 168 / 372

4-24 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
4.7 SEPARATING ROPS AND TIRES
1. Remove the lynch pin (2) and the lock pin (1) from
the ROPS frame.
2. Loosen the bolt (3) and remove the pin (4).
3. Place to fix the jack to the bottom of the rear axle.
4. Remove the nuts & bolts from the wheel.
Item
ROPS lock
bolt
Rear wheel
bolt
Tightening torque
48.1 ~ 55.8 Nm
4.9 ~ 5.7 kgf-m
35.5 ~ 41.2 lb-ft
215 Nm
22 kgf-m
160 lb-ft
Spec.
M10
M16
4.8 SEAT
1. Remove the the cover under the seat and then re-
move the seat (1).
2. Remove the return spring and the front cover (2).
196W433A
196W4D4A
(1) Lock pin (3) Bolt
(2) Lynch pin (4) Pin
(1) Seat
(2) Lynch pin
4.6 STEP
1. Remove the step mat (LH/RH) (1).
2. Remove the joystick mounting bolts and disconnect
the cover (2).
3. Remove the frame (3).
4. Remove the step (LH/RH) (4).
196W4D1A
(1) Step mat (3) Frame
(2) Cover (4) Step
TRANSMISSION - SERVICING