Daedong CK22, Workshop Manual

Page: 312 / 372

10-32 DS35-W00 May. 2007
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
ENGINEENGINEENGINEENGINEENGINE
HSTHSTHSTHSTHST
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
CK22/CK22H
2. Install the load check poppets: with O-rings, springs
and check plugs (17).
Item
Blocking plug
Tightening torque
42 Nm
4.3 kgf-m
31 lb-ft
4.2.3 JOY-STICK VALVE ASSEMBLY
1. Install the plug (19).
Item
End cap mounting
screw
Tightening torque
6.6 Nm
0.7 kgf-m
4.9 lb-ft
5. Assemble the float spool in the same manner us-
ing steps 4 through 5.
196W946A
(1) Plug
3. Install O-ring (15) in their grooves in the valve body
and carefully slide the spool (25) into its bore.
4. Install the end cap (20) and secure the assembly
with cap screws.
Item
Check plugs
Tightening torque
24 Nm
1.8 kgf-m
17.7 lb-ft
196W947A
(1) Wrench bolt (2) Spool control kit
196W948A
(1) Wrench bolt (2) Spool control kit
HYDRAULIC SYSTME - SERVICING