manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

connection attempts coming from a particular IP address or group of addresses. This can degrade the
performance of the NetDefendOS IPsec engine and explicitly dropping such traffic with an IP rule is
an efficient way of preventing it reaching the engine. In other words, IP rules can be used for
complete control over all traffic related to the tunnel.

Dead Peer Detection

Dead Peer Detection (DPD) can optionally be enabled for an IPsec tunnel. DPD monitors the
aliveness of the tunnel by looking for traffic coming from the peer at the other end of the tunnel. If
no message is seen within a length of time (specified by the advanced setting DPD Metric) then
NetDefendOS sends DPD-R-U-THERE messages to the peer to determine if it is still reachable and
alive.

If the peer does not respond to these messages during a period of time (specified by the advanced
setting DPD Expire Time) then the peer is considered dead and the tunnel is taken down.
NetDefendOS will then automatically try to re-establish the tunnel after a period of time (specified
by the advanced setting DPD Keep Time).

The advanced settings for DPD are described further in Section 9.4.6, “IPsec Advanced Settings”.
DPD is enabled by default for NetDefendOS IPsec tunnels. Disabling does not disable to ability to
respond to DPD-R-U-THERE from another peer.

Keep-alive

The IPsec Keep-alive option ensures that the tunnel remains established at all possible times even if
no traffic flows. It does this by continuously sending ICMP Ping messages through the tunnel. If
replies to the ping messages are not received then the tunnel link is assumed to be broken and an
attempt is automatically made to re-establish the tunnel. This feature is only useful for LAN to LAN
tunnels.

Optionally, a specific source IP address and/or a destination IP address for the pings can be
specified. It is recommended to specify a destination IP of a host which is known to being able to
reliably respond to ICMP messages. If a destination IP is not specified, NetDefendOS will use the
first IP address on the remote network.

An important usage of keep-alive is if a LAN to LAN tunnel with infrequent data traffic can only be
established from one side but needs to be kept alive for hosts on the other peer. If the peer that
establishes the tunnel uses keep-alive to keep the tunnel established, any hosts on the other side can
use the tunnel even though the other peer cannot establish the tunnel when it is needed.

Comparing DPD and Keep-alive

DPD and Keep-alive can be considered to perform a similar function which is detecting if an IPsec
tunnel is down and re-establishing it. However, there are differences:

•

Keep-alive can only be used for LAN to LAN IPsec tunnels. It cannot be used with roaming
clients.

•

Keep-alive is much faster at detecting that a tunnel is down and re-establishing it. It is therefore
a preferred solution for LAN to LAN tunnels.

Having keep-alive and DPD enabled simultaneously for a LAN to LAN tunnel is not needed since
DPD will never trigger if keep-alive pings are being sent.

IPsec Tunnel Quick Start

This section covers IPsec tunnels in some detail. A quick start checklist of setup steps for these
protocols in typical scenarios can be found in the following sections:

9.4.1. Overview

Chapter 9. VPN

445

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

H3C SecPath Series Command Reference Manual preview
SecPath Series
Brand: H3C Pages: 27
H3C SecPath Series Command Manual preview
SecPath Series
Brand: H3C Pages: 42
H3C SecPath F5020 Installation Manual preview
SecPath F5020
Brand: H3C Pages: 64
H3C H3C SecPath F1800-A Installation Manual preview
H3C SecPath F1800-A
Brand: H3C Pages: 13
Fortinet FortiMail-2000 Quick Start Manual preview
FortiMail-2000
Brand: Fortinet Pages: 2
IBASE Technology FWA8600 User Manual preview
FWA8600
Brand: IBASE Technology Pages: 112

Brands by name

Popular brands

Load more brands