manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

Determines how NetDefendOS will handle alternate checksum request options. These options were
initially intended to be used in negotiating for the use of better checksums in TCP. However, these
are not understood by any today's standard systems. As NetDefendOS cannot understand checksum
algorithms other than the standard algorithm, these options can never be accepted. The
ALTCHKREQ option is normally never seen on modern networks.

Default: StripLog

TCP Option ALTCHKDATA

Determines how NetDefendOS will handle alternate checksum data options. These options are used
to transport alternate checksums where permitted by ALTCHKREQ above. Normally never seen on
modern networks.

Default: StripLog

TCP Option Con Timeout

Determines how NetDefendOS will handle connection count options.

Default: StripLogBad

TCP Option Other

Specifies how NetDefendOS will deal with TCP options not covered by the above settings. These
options usually never appear on modern networks.

Default: StripLog

TCP SYN/URG

Specifies how NetDefendOS will deal with TCP packets with SYN (synchronize) flags and URG
(urgent data) flags both turned on. The presence of a SYN flag indicates that a new connection is in
the process of being opened, and an URG flag means that the packet contains data requiring urgent
attention. These two flags should not be turned on in a single packet as they are used exclusively to
crash computers with poorly implemented TCP stacks.

Default: DropLog

TCP SYN/PSH

Specifies how NetDefendOS will deal with TCP packets with SYN and PSH (push) flags both
turned on. The PSH flag means that the recipient stack should immediately send the information in
the packet to the destination application in the computer.

These two flags should not be turned on at the same time as it could pose a crash risk for poorly
implemented TCP stacks. However, some Apple MAC systems implement TCP in a non-standard
way, meaning that they always send out SYN packets with the PSH flag turned on. This is why
NetDefendOS normally removes the PSH flag and allows the packet through despite the fact that
such packets would be dropped if standards were strictly followed.

Default: StripSilent

TCP SYN/RST

The TCP RST flag together with SYN; normally invalid (strip=strip RST).

13.2. TCP Level Settings

Chapter 13. Advanced Settings

558

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

PaloAlto Networks PA-220R Hardware Reference Manual preview
PA-220R
Brand: PaloAlto Networks Pages: 40
Ruijie Networks RG-WALL1600-S3600 Hardware Installation And Reference Manual preview
RG-WALL1600-S3600
Brand: Ruijie Networks Pages: 28
ZyXEL Communications ZyWALL 70 Specifications preview
ZyWALL 70
Brand: ZyXEL Communications Pages: 2
ZyXEL Communications USG Flex Series Vpn Configuration Manual preview
USG Flex Series
Brand: ZyXEL Communications Pages: 18
Fortinet FortiGate 3000 Administration Manual preview
FortiGate 3000
Brand: Fortinet Pages: 398
Watchguard Firebox T30 Quick Start Manual preview
Firebox T30
Brand: Watchguard Pages: 41
Watchguard Firebox T35-R Quick Start Manual preview
Firebox T35-R
Brand: Watchguard Pages: 27
IronPort S660 Quick Start Manual preview
S660
Brand: IronPort Pages: 3
Fortinet FortiGate FortiGate-300A Administration Manual preview
FortiGate FortiGate-300A
Brand: Fortinet Pages: 392
PaloAlto Networks PA-200 Quick Start preview
PA-200
Brand: PaloAlto Networks Pages: 2
NETGEAR ProSafe FR114W Specifications preview
ProSafe FR114W
Brand: NETGEAR Pages: 2
Arxceo ALLY IP1000 User Manual preview
ALLY IP1000
Brand: Arxceo Pages: 34

Brands by name

Popular brands

Load more brands