manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

links can provide an area with a logical path to the backbone area.

This virtual link is established between two Area Border Routers (ABRs) that are on one common
area, with one of the ABRs connected to the backbone area. In the example below two routers are
connected to the same area (Area 1) but just one of them, fw1, is connected physically to the
backbone area.

Figure 4.10. Virtual Links Connecting Areas

In the above example, a Virtual Link is configured between fw1 and fw2 on Area 1 as it is used as
the transit area. In this configuration only the Router ID has to be configured. The diagram shows
that fw2 needs to have a Virtual Link to fw1 with Router ID 192.168.1.1 and vice versa. These
virtual links need to be configured in Area 1.

B. Linking a Partitioned Backbone

OSPF allows for linking a partitioned backbone using a virtual link. The virtual link should be
configured between two separate ABRs that touch the backbone from each side and have a common
area in between.

4.5.2. OSPF Concepts

Chapter 4. Routing

205

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Watchguard Firebox NV5 Hardware Manual preview
Firebox NV5
Brand: Watchguard Pages: 11
W&T 55211 Manual preview
55211
Brand: W&T Pages: 114
StarTech.com EC13942A2 Instruction Manual preview
EC13942A2
Brand: StarTech.com Pages: 2
Watchguard Firebox Vclass Quick Start Manual preview
Firebox Vclass
Brand: Watchguard Pages: 2
Skybox Securoty Appliance 5500 Quick Start Manual preview
Appliance 5500
Brand: Skybox Securoty Pages: 44
Fortinet FortiGate 500A Installation Manual preview
FortiGate 500A
Brand: Fortinet Pages: 54
McAfee SG720 Quick Installation Manual preview
SG720
Brand: McAfee Pages: 32
Barracuda NG Firewall F18 Manual preview
NG Firewall F18
Brand: Barracuda Pages: 5
finjan NG-5000 User Manual preview
NG-5000
Brand: finjan Pages: 18
Barracuda Link Balancer Installation preview
Link Balancer
Brand: Barracuda Pages: 5

Brands by name

Popular brands

Load more brands