manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

4.

Click OK

4.6.3.2. IGMP Rules Configuration - Address Translation

The following examples illustrates the IGMP rules needed to configure IGMP according to the
Address Translation scenario described above in Section 4.6.2.2, “Multicast Forwarding - Address
Translation Scenario”. We need two IGMP report rules, one for each client interface. The interface
if1 uses no address translation and if2 translates the multicast group to 237.192.10.0/24. We also
need two query rules, one for the translated address and interface, and one for the original address
towards if1.

Two examples are provided, one for each pair of report and query rule. The upstream multicast
router uses IP UpstreamRouterIP.

Example 4.18. if1 Configuration

The following steps needs to be executed to create the report and query rule pair for if1 which uses no address
translation.

Web Interface

A. Create the first IGMP Rule:

1.

Go to: Network > Routing > IGMP Rules > Add > IGMP Rule

2.

Under General enter:

•

Name: A suitable name for the rule, for example Reports_if1

•

Type: Report

•

Action: Proxy

•

Output: wan (this is the relay interface)

3.

Under Address Filter enter:

•

Source Interface: if1

•

Source Network: if1net

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

4.

Click OK

B. Create the second IGMP Rule:

1.

Again, go to: Network > Routing > IGMP Rules > Add > IGMP Rule

2.

Under General enter:

4.6.3. IGMP Configuration

Chapter 4. Routing

235

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

ZyXEL Communications ZYWALL OTPV2 - Support Notes preview
ZYWALL OTPV2 -
Brand: ZyXEL Communications Pages: 64
ZyXEL Communications ZyWALL SSL 10 Support Notes preview
ZyWALL SSL 10
Brand: ZyXEL Communications Pages: 102
HotBrick LB-2 Setup Manual preview
LB-2
Brand: HotBrick Pages: 13
Sophos UTM 110 Mounting Instructions preview
UTM 110
Brand: Sophos Pages: 2
Sophos WS1100 Setup Manual preview
WS1100
Brand: Sophos Pages: 4
Sophos SG 105(w) Mounting Instructions preview
SG 105(w)
Brand: Sophos Pages: 2
Sophos XGS 107 Operating Instructions Manual preview
XGS 107
Brand: Sophos Pages: 8
Sophos UTM 425 Operating Instructions Manual preview
UTM 425
Brand: Sophos Pages: 9
Sophos XGS 5500 Operating Instructions Manual preview
XGS 5500
Brand: Sophos Pages: 15
Sophos XG 750 Operating Instructions Manual preview
XG 750
Brand: Sophos Pages: 14
Sophos XG 550 Quick Start Manual preview
XG 550
Brand: Sophos Pages: 28
Sophos XG 86 Quick Start Manual preview
XG 86
Brand: Sophos Pages: 32
Sophos XGS 2100 Quick Start Manual preview
XGS 2100
Brand: Sophos Pages: 65

Brands by name

Popular brands

Load more brands