manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

Block 0000 Src

Block 0.0.0.0 as source address.

Default: Drop

Block 0 Net

Block 0.* as source addresses.

Default: DropLog

Block 127 Net

Block 127.* as source addresses.

Default: DropLog

Block Multicast Src

Block multicast both source addresses (224.0.0.0 - 255.255.255.255).

Default: DropLog

TTL Min

The minimum TTL value accepted on receipt.

Default: 3

TTL on Low

Determines the action taken on packets whose TTL falls below the stipulated TTLMin value.

Default: DropLog

Multicast TTL on Low

What action to take on too low multicast TTL values.

Default: DropLog

Default TTL

Indicates which TTL NetDefendOS is to use when originating a packet. These values are usually
between 64 and 255.

Default: 255

Layer Size Consistency

Verifies that the size information contained in each "layer" (Ethernet, IP, TCP, UDP, ICMP) is
consistent with that of other layers.

13.1. IP Level Settings

Chapter 13. Advanced Settings

553

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Nortel 5009 Notice preview
5009
Brand: Nortel Pages: 2
ADTRAN Advanta 2100 Specifications preview
Advanta 2100
Brand: ADTRAN Pages: 2
Sonnet TANGO Quick Start Manual preview
TANGO
Brand: Sonnet Pages: 6
Nexcom NI 121F User Manual preview
NI 121F
Brand: Nexcom Pages: 76
H3C SecPath F10 0 Series Installation Manual preview
SecPath F10 0 Series
Brand: H3C Pages: 68
Stonesoft SSL-3200 Series Appliance Installation Manual preview
SSL-3200 Series
Brand: Stonesoft Pages: 50
Stonesoft StoneGate FW-5000 Series Appliance Installation Manual preview
StoneGate FW-5000 Series
Brand: Stonesoft Pages: 51
Hirschmann EAGLE mGuard Series Description And Operating Instruction preview
EAGLE mGuard Series
Brand: Hirschmann Pages: 8
Hirschmann EAGLE 20 MM/MM User Manual preview
EAGLE 20 MM/MM
Brand: Hirschmann Pages: 36
Hirschmann EAGLE 20 Series Reference Manual preview
EAGLE 20 Series
Brand: Hirschmann Pages: 40
Hirschmann EAGLE One User Manual preview
EAGLE One
Brand: Hirschmann Pages: 54

Brands by name

Popular brands

Load more brands