manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

1.

Go to: Rules > IP Rules > Add > IPRule

2.

Now enter:

•

Name: H323Out

•

Action: NAT

•

Service: H323-Gatekeeper

•

Source Interface: lan

•

Destination Interface: any

•

Source Network: lannet

•

Destination Network: 0.0.0.0/0 (all-nets)

•

Comment: Allow outgoing communication with a gatekeeper

3.

Click OK

Note: Outgoing calls do not need a specific rule

There is no need to specify a specific rule for outgoing calls. NetDefendOS monitors
the communication between "external" phones and the Gatekeeper to make sure that it
is possible for internal phones to call the external phones that are registered with the
gatekeeper.

Example 6.10. Using the H.323 ALG in a Corporate Environment

This scenario is an example of a more complex network that shows how the H.323 ALG can be deployed in a
corporate environment. At the head office DMZ a H.323 Gatekeeper is placed that can handle all H.323 clients in
the head-, branch- and remote offices. This will allow the whole corporation to use the network for both voice
communication and application sharing. It is assumed that the VPN tunnels are correctly configured and that all
offices use private IP-ranges on their local networks. All outside calls are done over the existing telephone
network using the gateway (ip-gateway) connected to the ordinary telephone network.

6.2.9. The H.323 ALG

Chapter 6. Security Mechanisms

318

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

IBASE Technology FWA8600 User Manual preview
FWA8600
Brand: IBASE Technology Pages: 112
Fortinet FortiMail-4000 Quick Start Manual preview
FortiMail-4000
Brand: Fortinet Pages: 2
ZyXEL Communications ZyWALL 35 Series User Manual preview
ZyWALL 35 Series
Brand: ZyXEL Communications Pages: 872
H3C SecPath F1000-AI-5 Series Installation Manual preview
SecPath F1000-AI-5 Series
Brand: H3C Pages: 70
H3C SecPath F5000-A5 Installation Manual preview
SecPath F5000-A5
Brand: H3C Pages: 121
Watchguard Firebox NV5 Quick Start Manual preview
Firebox NV5
Brand: Watchguard Pages: 2
Forcepoint V5000 G4R2 Quick Start Manual preview
V5000 G4R2
Brand: Forcepoint Pages: 2
Forcepoint V5000 G2 Quick Start Manual preview
V5000 G2
Brand: Forcepoint Pages: 2
Forcepoint NGFW 51 How To Install preview
NGFW 51
Brand: Forcepoint Pages: 9
Forcepoint Stonesoft 320X Hardware Manual preview
Stonesoft 320X
Brand: Forcepoint Pages: 12
Forcepoint V10000 Appliance Upgrade Manual preview
V10000
Brand: Forcepoint Pages: 90

Brands by name

Popular brands

Load more brands