manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

Example 9.3. Using an Identity List

This example shows how to create and use an Identification List for use in the VPN tunnel. This Identification List
will contain one ID with the type DN, distinguished name, as the primary identifier. Note that this example does
not illustrate how to add the specific IPsec tunnel object.

Command-Line Interface

First create an Identification List:

gw-world:/> add IDList MyIDList

Then, create an ID:

gw-world:/> cc IDList MyIDList

gw-world:/MyIDList> add ID JohnDoe

Type=DistinguishedName
CommonName="John Doe"
OrganizationName=D-Link
OrganizationalUnit=Support
Country=Sweden
[email protected]

gw-world:/MyIDList> cc

Finally, apply the Identification List to the IPsec tunnel:

gw-world:/> set Interface IPsecTunnel MyIPsecTunnel

AuthMethod=Certificate
IDList=MyIDList
RootCertificates=AdminCert
GatewayCertificate=AdminCert

Web Interface

First create an Identification List:

1.

Go to: Objects > VPN Objects > IKE ID Lists > Add > ID List

2.

Enter a name for the list, for example MyIDList

3.

Click OK

Then, create an ID:

1.

Go to: Objects > VPN Objects > IKE ID Lists > Add > ID List

2.

Select MyIDList

3.

Enter a name for the ID, for example JohnDoe

4.

Select Distinguished name in the Type control

5.

Now enter:

•

Common Name: John Doe

•

Organization Name: D-Link

•

Organizational Unit: Support

•

Country: Sweden

•

Email Address: [email protected]

6.

Click OK

9.3.8. Identification Lists

Chapter 9. VPN

442

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Meraki MX67C Installation Manuals preview
MX67C
Brand: Meraki Pages: 9
PaloAlto Networks PA-410 Quick Start Manual preview
PA-410
Brand: PaloAlto Networks Pages: 2
ZyXEL Communications ZyWALL 1050 Specifications preview
ZyWALL 1050
Brand: ZyXEL Communications Pages: 4
Tosibox Lock 100 User Manual preview
Lock 100
Brand: Tosibox Pages: 70
PaloAlto Networks PA-3020 Hardware Reference Manual preview
PA-3020
Brand: PaloAlto Networks Pages: 26
Lanner NCA-4210 User Manual preview
NCA-4210
Brand: Lanner Pages: 88
ZyXEL Communications ZyWALL USG Series Reference Manual preview
ZyWALL USG Series
Brand: ZyXEL Communications Pages: 426
ZyXEL Communications ZyXEL ZyWALL USG-1000 User Manual preview
ZyXEL ZyWALL USG-1000
Brand: ZyXEL Communications Pages: 986
Barracuda Link Balancer Installation preview
Link Balancer
Brand: Barracuda Pages: 5

Brands by name

Popular brands

Load more brands