manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

Chapter 5. DHCP Services

This chapter describes DHCP services in NetDefendOS.

• Overview, page 255

• DHCP Servers, page 256

• DHCP Relaying, page 262

• IP Pools, page 265

5.1. Overview

Dynamic Host Configuration Protocol (DHCP) is a protocol that allows network administrators to
automatically assign IP numbers to computers on a network.

IP Address Assignment

A DHCP Server implements the task of assigning IP addresses to DHCP clients. These addresses
come from a predefined IP address pool which DHCP manages. When a DHCP server receives a
request from a DHCP client, it returns the configuration parameters (such as an IP address, a MAC
address, a domain name, and a lease for the IP address) to the client in a unicast message.

DHCP Leases

Compared to static assignment, where the client owns the address, dynamic addressing by a DHCP
server leases the address to each client for a predefined period of time. During the lifetime of a
lease, the client has permission to keep the assigned address and is guaranteed to have no address
collision with other clients.

Lease Expiration

Before the expiration of the lease, the client needs to renew the lease from the server so it can keep
using the assigned IP address. The client may also decide at any time that it no longer wishes to use
the IP address it was assigned, and may terminate the lease and release the IP address.

The lease time can be configured in a DHCP server by the administrator.

255

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Watchguard Firebox T35 Quick Start Manual preview
Firebox T35
Brand: Watchguard Pages: 29
Draytek Vigor 2820Vn Declaration Of Conformity preview
Vigor 2820Vn
Brand: Draytek Pages: 1
Aaeon ICS-6270 User Manual preview
ICS-6270
Brand: Aaeon Pages: 104
Nokia IP45 Quick Start Manual preview
IP45
Brand: Nokia Pages: 4
Nokia IP530 - Remote Access Server Installation Manual preview
IP530 - Remote Access Server
Brand: Nokia Pages: 9
Nokia IP71 User Manual preview
IP71
Brand: Nokia Pages: 120
Nokia IP710 Series Installation Manual preview
IP710 Series
Brand: Nokia Pages: 182
ZyXEL Communications ZyWALL USG 100 Series Brochure & Specs preview
ZyWALL USG 100 Series
Brand: ZyXEL Communications Pages: 6
Fortinet FortiBridge-1000 Quick Start Manual preview
FortiBridge-1000
Brand: Fortinet Pages: 2
IBM Proventia Management SiteProtector SP2001 Hardware Configuration Manual preview
Proventia Management SiteProtector SP2001
Brand: IBM Pages: 57
PaloAlto Networks PA-415 Quick Start Manual preview
PA-415
Brand: PaloAlto Networks Pages: 2
Fortinet FortiDB-1000B Install Manual preview
FortiDB-1000B
Brand: Fortinet Pages: 24
Kerio Control NG100W Quick Start Manual preview
Control NG100W
Brand: Kerio Pages: 4
Innominate mGuard Reference Manual preview
mGuard
Brand: Innominate Pages: 260

Brands by name

Popular brands

Load more brands