manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

•

Timestamp - The number of seconds since 1970-01-01. Used to set a timestamp when this
packet was sent from the NetDefend Firewall.

In addition, two more attributes may be sent:

•

Input Gigawords - Indicates how many times the Input Bytes counter has wrapped. This is only
sent if Input Bytes has wrapped, and if the Input Bytes attribute is sent.

•

Output Gigawords - Indicates how many times the Output Bytes counter has wrapped. This is
only sent if Output Bytes has wrapped, and if the Output Bytes attribute is sent.

Tip: The meaning of the asterisk after a list entry

The asterisk (*) symbol after an entry in the list above indicates that the sending of the
parameter is optional and is configurable.

2.3.3. Interim Accounting Messages

In addition to START and STOP messages NetDefendOS can optionally periodically send Interim
Accounting Messages to update the accounting server with the current status of an authenticated
user.

Messages are Snapshots

An interim accounting message can be seen as a snapshot of the network resources that an
authenticated user has used up until a given point. With this feature, the RADIUS server can track
how many bytes and packets an authenticated user has sent and received up until the point when the
last message was sent.

An Interim Accounting Message contains the current values of the statistics for an authenticated
user. It contains more or less the same parameters as found in an accounting request STOP message,
except that the Acct-Terminate-Cause is not included (as the user has not disconnected yet).

Message Frequency

The frequency of interim accounting messages can be specified either on the authentication server or
in NetDefendOS. Switching on the setting in NetDefendOS will override the setting on the
accounting server.

2.3.4. Configuring RADIUS Accounting

In order to activate RADIUS accounting a number of steps must be followed:

•

The RADIUS server must be defined in NetDefendOS.

•

A user authentication object must have a rule associated with it where a RADIUS server is
specified.

•

The external RADIUS server itself must be correctly configured.

Important: The RADIUS Vendor ID must be set to 5089

When configuring the external RADIUS server to communicate with NetDefendOS, it
is necessary to enter a value for the Vendor ID (vid). This value should be specified as
5089.

2.3.3. Interim Accounting Messages

Chapter 2. Management and Maintenance

68

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Watchguard Firebox M5800 Hardware Manual preview
Firebox M5800
Brand: Watchguard Pages: 18
Watchguard Firebox V10 Command Line Interface Manual preview
Firebox V10
Brand: Watchguard Pages: 181
Forcepoint NGFW Quick Start Manual preview
NGFW
Brand: Forcepoint Pages: 12
IBM 1G User Manual preview
1G
Brand: IBM Pages: 52
Nexcom NSA 1150 User Manual preview
NSA 1150
Brand: Nexcom Pages: 61
Nexcom NSA 3111 Series User Manual preview
NSA 3111 Series
Brand: Nexcom Pages: 80
Cisco FirePOWER 7000 Manual preview
FirePOWER 7000
Brand: Cisco Pages: 18
Cisco Firepower 2100 Series Manual preview
Firepower 2100 Series
Brand: Cisco Pages: 12
Cisco Firepower 8120 Getting Started Manual preview
Firepower 8120
Brand: Cisco Pages: 34
Cisco Firepower 3500 Appendix preview
Firepower 3500
Brand: Cisco Pages: 12
Cisco PIX 520 - PIX Firewall 520 Installation Manual preview
PIX 520 - PIX Firewall 520
Brand: Cisco Pages: 58
Cisco Firepower 2110 Hardware Installation Manual preview
Firepower 2110
Brand: Cisco Pages: 62
Cisco PIX 525 User Manual preview
PIX 525
Brand: Cisco Pages: 30
Cisco ISA 3000 Product Documentation preview
ISA 3000
Brand: Cisco Pages: 12
Cisco ISA 3000 Hardware Installation Manual preview
ISA 3000
Brand: Cisco Pages: 46
Cisco PIX 506 Quick Start Manual preview
PIX 506
Brand: Cisco Pages: 18
Cisco M190 Quick Start Manual preview
M190
Brand: Cisco Pages: 14
Cisco Firepower 1100 Series Installation Manual preview
Firepower 1100 Series
Brand: Cisco Pages: 44

Brands by name

Popular brands

Load more brands