manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

Example 9.4. Setting up a PSK based VPN tunnel for roaming clients

This example describes how to configure an IPsec tunnel at the head office NetDefend Firewall for roaming
clients that connect to the office to gain remote access. The head office network uses the 10.0.1.0/24 network
span with external firewall IP wan_ip.

Web Interface

A. Create a pre-shared key for IPsec authentication:

1.

Go to: Objects > Authentication Objects > Add > Pre-Shared Key

2.

Now enter:

•

Name: Enter a name for the key, for example SecretKey

•

Shared Secret: Enter a secret passphrase

•

Confirm Secret: Enter the secret passphrase again

3.

Click OK

B. Configure the IPsec tunnel:

1.

Go to: Interfaces > IPsec > Add > IPsec Tunnel

2.

Now enter:

•

Name: RoamingIPsecTunnel

•

Local Network: 10.0.1.0/24 (This is the local network that the roaming users will connect to)

•

Remote Network: all-nets

•

Remote Endpoint: (None)

•

Encapsulation Mode: Tunnel

3.

For Algorithms enter:

•

IKE Algorithms: Medium or High

•

IPsec Algorithms: Medium or High

4.

For Authentication enter:

•

Pre-Shared Key: Select the pre-shared key created earlier

5.

Under the Routing tab:

•

Enable the option: Dynamically add route to the remote network when a tunnel is established.

6.

Click OK

C. Finally configure the IP rule set to allow traffic inside the tunnel.

Self-signed Certificate based client tunnels

The following example shows how a certificate based tunnel can be set up.

Example 9.5. Setting up a Self-signed Certificate based VPN tunnel for roaming clients

This example describes how to configure an IPsec tunnel at the head office NetDefend Firewall for roaming
clients that connect to the office to gain remote access. The head office network uses the 10.0.1.0/24 network

9.4.3. Roaming Clients

Chapter 9. VPN

447

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Draytek Vigor 2820Vn Declaration Of Conformity preview
Vigor 2820Vn
Brand: Draytek Pages: 1
SonicWALL TZ270 Quick Start Manual preview
TZ270
Brand: SonicWALL Pages: 2
NETGEAR ProSafe FVS318v3 Reference Manual preview
ProSafe FVS318v3
Brand: NETGEAR Pages: 20
D-Link DIR-330 - Wireless G VPN Router User Manual preview
DIR-330 - Wireless G VPN Router
Brand: D-Link Pages: 112
D-Link DFL-80 Quick Installation Manual preview
DFL-80
Brand: D-Link Pages: 16
D-Link DFL-700 - Security Appliance Quick Installation Manual preview
DFL-700 - Security Appliance
Brand: D-Link Pages: 12
D-Link DFL-800 - Security Appliance Application Note preview
DFL-800 - Security Appliance
Brand: D-Link Pages: 23
D-Link DFL-800 - Security Appliance Quick Installation Manual preview
DFL-800 - Security Appliance
Brand: D-Link Pages: 32
D-Link DFL-700 - Security Appliance Product Manual preview
DFL-700 - Security Appliance
Brand: D-Link Pages: 138
D-Link DFL-80 User Manual preview
DFL-80
Brand: D-Link Pages: 147
D-Link DFL-870 Reference Manual preview
DFL-870
Brand: D-Link Pages: 948
D-Link DFL-870 Quick Installation Manual preview
DFL-870
Brand: D-Link Pages: 4
D-Link DFL-600 User Manual preview
DFL-600
Brand: D-Link Pages: 131
PaloAlto Networks Prisma SD-WAN ION 9000 Hardware Reference Manual preview
Prisma SD-WAN ION 9000
Brand: PaloAlto Networks Pages: 34
Watchguard XTM 33-W Hardware Manual preview
XTM 33-W
Brand: Watchguard Pages: 24
Check Point UTM-1 1050 Datasheet preview
UTM-1 1050
Brand: Check Point Pages: 4

Brands by name

Popular brands

Load more brands