manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

1.

Go to: Interfaces > Ethernet > Edit (lan)

2.

Now enter:

•

IP Address: 10.0.0.1

•

Network: 10.0.0.0/24

•

Transparent Mode: Disable

•

Add route for interface network: Disable

3.

Click OK

4.

Go to: Interfaces > Ethernet > Edit (dmz)

5.

Now enter:

•

IP Address: 10.0.0.2

•

Network: 10.0.0.0/24

•

Transparent Mode: Disable

•

Add route for interface network: Disable

6.

Click OK

Configure the interface groups:

1.

Go to: Interfaces > Interface Groups > Add > InterfaceGroup

2.

Now enter:

•

Name: TransparentGroup

•

Security/Transport Equivalent: Disable

•

Interfaces: Select lan and dmz

3.

Click OK

Configure the routing:

1.

Go to: Routing > Main Routing Table > Add > SwitchRoute

2.

Now enter:

•

Switched Interfaces: TransparentGroup

•

Network: 10.0.0.0/24

•

Metric: 0

3.

Click OK

Configure the rules:

1.

Go to: Rules > IP Rules > Add > IPRule

2.

Now enter:

•

Name: HTTP-LAN-to-DMZ

•

Action: Allow

•

Service: http

•

Source Interface: lan

•

Destination Interface: dmz

•

Source Network: 10.0.0.0/24

•

Destination Network: 10.1.4.10

4.7.3. Transparent Mode Scenarios

Chapter 4. Routing

249

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Watchguard Firebox SOHO 6.1 User Manual preview
Firebox SOHO 6.1
Brand: Watchguard Pages: 140
IBM DataPower XH40 Quick Start Manual preview
DataPower XH40
Brand: IBM Pages: 2
GajShield UTM Series Quick Start Manual preview
UTM Series
Brand: GajShield Pages: 8
IBASE Technology FWA6504 User Manual preview
FWA6504
Brand: IBASE Technology Pages: 16
PaloAlto Networks PA-415 Quick Start Manual preview
PA-415
Brand: PaloAlto Networks Pages: 2
Lanner FW-8894 User Manual preview
FW-8894
Brand: Lanner Pages: 89
Lanner FW-7571 User Manual preview
FW-7571
Brand: Lanner Pages: 42
McAfee Manager Appliance Quick Start Manual preview
Manager Appliance
Brand: McAfee Pages: 12
ZyXEL Communications ZyWALL 70 User Manual preview
ZyWALL 70
Brand: ZyXEL Communications Pages: 705
ZyXEL Communications ATP200 User Manual preview
ATP200
Brand: ZyXEL Communications Pages: 852
Synaccess netBooter NP-02 User Manual preview
netBooter NP-02
Brand: Synaccess Pages: 46
Alpha Shield Hardware Firewall User Manual preview
Hardware Firewall
Brand: Alpha Shield Pages: 19

Brands by name

Popular brands

Load more brands