D-Link NetDefend DFL-1660 User Manual Download Page 29 | Manualshive

Page: 29 / 595

background image

Chapter 2. Management and Maintenance

This chapter describes the management, operations and maintenance related aspects of
NetDefendOS.

• Managing NetDefendOS, page 29

• Events and Logging, page 60

• RADIUS Accounting, page 66

• Monitoring, page 72

• The pcapdump Command, page 81

• Maintenance, page 84

2.1. Managing NetDefendOS

2.1.1. Overview

NetDefendOS is designed to give both high performance and high reliability. Not only does it
provide an extensive feature set, it also enables the administrator to be in full control of almost every
detail of the system. This means the product can be deployed in the most challenging environments.

A good understanding on how NetDefendOS configuration is performed is crucial for proper usage
of the system. For this reason, this section provides an in-depth presentation of the configuration
subsystem as well as a description of how to work with the various management interfaces.

Management Interfaces

NetDefendOS provides the following management interfaces:

The Web Interface

The Web Interface (also known as the Web User Interface or WebUI) is
built into NetDefendOS and provides a user-friendly and intuitive
graphical management interface, accessible from a standard web
browser.

The browser connects to one of the hardware's Ethernet interfaces using
HTTP or HTTPS and the NetDefendOS responds like a web server,
allowing web pages to be used as the management interface.

This feature is fully described in Section 2.1.3, “The Web Interface”.

The CLI

The Command Line Interface (CLI), accessible locally via serial console
port or remotely using the Secure Shell (SSH) protocol, provides the
most fine-grained control over all parameters in NetDefendOS.

This feature is fully described in Section 2.1.4, “The CLI”.

Secure Copy

Secure Copy (SCP) is a widely used communication protocol for file
transfer. No specific SCP client is provided with NetDefendOS
distributions but there exists a wide selection of SCP clients available
for nearly all workstation platforms.

SCP is a complement to CLI usage and provides a secure means of file
transfer between the administrator's workstation and the NetDefend

29

«
...
27
28
29
30
31
...
»

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Brand: Cigent Technology Pages: 50

Brand: H3C Pages: 6

Brand: Neoware Pages: 28

Brand: NETGEAR Pages: 2

FVX538v2 - ProSafe VPN Firewall Dual WAN

Brand: NETGEAR Pages: 2

FWG114Pv2 - Wireless Firewall With USB Print Server

Brand: NETGEAR Pages: 10

FVS338 - ProSafe VPN Firewall 50 Router

Brand: NETGEAR Pages: 10

Brand: NETGEAR Pages: 82

ProSafe Quad WAN FR538G

Brand: NETGEAR Pages: 194

Brand: Nlynx Pages: 75

Brand: Billion Pages: 130

Brand: Watchguard Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands