D-Link NetDefend DFL-1660, User Manual

Page: 313 / 595

4. Click OK
1. Go to: Rules > IP Rules > Add > IPRule
2. Now enter:
• Name: H323In
• Action: Allow
• Service: H323
• Source Interface: any
• Destination Interface: core
• Source Network: 0.0.0.0/0 (all-nets)
• Destination Network: wan_ip (external IP of the firewall)
• Comment: Allow incoming calls to H.323 phone at ip-phone
3. Click OK
To place a call to the phone behind the NetDefend Firewall, place a call to the external IP address on
the firewall. If multiple H.323 phones are placed behind the firewall, one SAT rule has to be
configured for each phone. This means that multiple external addresses have to be used. However, it
is preferred to use a H.323 gatekeeper as in the "H.323 with Gatekeeper" scenario, as this only
requires one external address.
Example 6.6. Two Phones Behind Different NetDefend Firewalls
This scenario consists of two H.323 phones, each one connected behind the NetDefend Firewall on a network
with public IPv4 addresses. In order to place calls on these phones over the Internet, the following rules need to
be added to the rule listings in both firewalls. Make sure there are no rules disallowing or allowing the same kind
of ports/traffic before these rules.
Web Interface
Outgoing Rule:
1. Go to: Rules > IP Rules > Add > IPRule
2. Now enter:
• Name: H323AllowOut
6.2.9. The H.323 ALG Chapter 6. Security Mechanisms
313