manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

•

Name: A suitable name for the rule, for example Queries_if2

•

Type: Query

•

Action: Proxy

•

Output: if2 (this is the relay interface)

3.

Under Address Filter enter:

•

Source Interface: wan

•

Source Network: UpstreamRouterIp

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

4.

Click OK

Advanced IGMP Settings

There are a number of IGMP advanced settings which are global and apply to all
interfaces which do not have IGMP settings explicitly specified for them.

4.6.4. Advanced IGMP Settings

The following advanced settings for IGMP can be found in the Web Interface by going to:
Network > Routing > Advanced Multicast Settings

Auto Add Multicast Core Route

This setting will automatically add core routes in all routing tables for the multicast IP address range
224.0.0.0/4. If the setting is disabled, multicast packets might be forwarded according to the default
route.

Default: Enabled

IGMP Before Rules

For IGMP traffic, by-pass the normal IP rule set and consult the IGMP rule set.

Default: Enabled

IGMP React To Own Queries

The firewall should always respond with IGMP Membership Reports, even to queries originating
from itself. Global setting on interfaces without an overriding IGMP Setting.

Default: Disabled

IGMP Lowest Compatible Version

4.6.4. Advanced IGMP Settings

Chapter 4. Routing

237

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Tandberg Data BAKSTOR Administration Manual preview
BAKSTOR
Brand: Tandberg Data Pages: 67
Freedom9 freeGuard Slim 100 User Manual preview
freeGuard Slim 100
Brand: Freedom9 Pages: 170
ZyXEL Communications Unified Security Gateway ZyWALL 300 Specifications preview
Unified Security Gateway ZyWALL 300
Brand: ZyXEL Communications Pages: 4
PaloAlto Networks PA-5450 Quick Start Manual preview
PA-5450
Brand: PaloAlto Networks Pages: 2
SonicWALL TZ670 Quick Start Manual preview
TZ670
Brand: SonicWALL Pages: 2
SonicWALL TZ600 Quick Start Manual preview
TZ600
Brand: SonicWALL Pages: 2
Innominate mGuard Reference Manual preview
mGuard
Brand: Innominate Pages: 260
Billion OTP Specifications preview
OTP
Brand: Billion Pages: 2
Allied Telesis AlliedWare Plus AR Series Technical Manual preview
AlliedWare Plus AR Series
Brand: Allied Telesis Pages: 43
Allied Telesis AR Router Series Hardware Reference Manual preview
AR Router Series
Brand: Allied Telesis Pages: 111

Brands by name

Popular brands

Load more brands