manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

•

Interface Type - Specifies if it is a PPTP or L2TP client.

•

Remote Endpoint - The IP address of the remote endpoint. Where this is specified as a URL,
the prefix dns: must be precede it.

Names of Assigned Addresses

Both PPTP and L2TP utilizes dynamic IP configuration using the PPP LCP protocol. When
NetDefendOS receives this information, it is stored in symbolic host/network names. The settings
for this are:

•

Inner IP Address - The host name that is used for storing the assigned IP address. If this
network object exists and has a value which is not 0.0.0.0 then the PPTP/L2TP client will try to
get that one from the PPTP/L2TP server as the preferred IP.

•

Automatically pick name - If this option is enabled then NetDefendOS will create a host name
based on the name of the PPTP/L2TP interface, for example ip_PPTPTunnel1.

•

Primary/Secondary DNS Name - This defines the DNS servers from a list of predefined
network objects.

Note: The default PPTP/L2TP route

A PPTP/L2TP server will not provide information such as gateway or broadcast
addresses, as this is not used with PPTP/L2TP tunnels. When using PPTP/L2TP, the
default route is normally routed directly across the PPTP/L2TP tunnel without a
specified gateway.

Authentication

•

Username - Specifies the username to use for this PPTP/L2TP interface.

•

Password - Specifies the password for the interface.

•

Authentication - Specifies which authentication protocol to use.

•

MPPE - Specifies if Microsoft Point-to-Point Encryption is used and which level to use.

If Dial On Demand is enabled then the PPTP/L2TP tunnel will not be set up until traffic is sent on
the interface. The parameters for this option are:

•

Activity Sense - Specifies if dial-on-demand should trigger on Send or Recv or both.

•

Idle Timeout - The time of inactivity in seconds to wait before disconnection.

Using the PPTP Client Feature

One usage of the PPTP client feature is shown in the scenario depicted below.

Here a number of clients are being NATed through NetDefendOS before being connected to a PPTP
server on the other side of the NetDefend Firewall. If more that one of the clients is acting as a
PPTP client which is trying to connect to the PPTP server then this will not work because of the
NATing.

The only way of achieving multiple PPTP clients being NATed like this, is for the NetDefend
Firewall to act as a PPTP client when it connects to the PPTP server. To summarize the setup:

9.5.4. PPTP/L2TP Clients

Chapter 9. VPN

470

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

Fortinet FortiMail-2000 Quick Start Manual preview
FortiMail-2000
Brand: Fortinet Pages: 2
Barracuda Networks Spyware Firewall Quick Start Manual preview
Spyware Firewall
Brand: Barracuda Networks Pages: 2
Nortel 5009 Notice preview
5009
Brand: Nortel Pages: 2
ZyXEL Communications ZyWALL 35 Series User Manual preview
ZyWALL 35 Series
Brand: ZyXEL Communications Pages: 872
ZyXEL Communications USG110 User Manual preview
USG110
Brand: ZyXEL Communications Pages: 1090
Quanmax NWA-6500 Series User Manual preview
NWA-6500 Series
Brand: Quanmax Pages: 73
Synaccess netBooter NP-02 User Manual preview
netBooter NP-02
Brand: Synaccess Pages: 46

Brands by name

Popular brands

Load more brands