manualshive.com logo in svg

D-Link NetDefend DFL-1660, User Manual

The D-Link NetDefend DFL-1660 is a powerful network security appliance designed to protect your network against the latest threats. Ensure optimum performance and advanced features by referring to the comprehensive Reference Manual, available for free download from our website. Safeguard your network with this reliable and user-friendly product.

Share
Download
background image

For information about the default user name and password, see Section 2.1.2, “The Default
Administrator Account” .

Note: Remote management access

Access to the Web Interface is regulated by the configured remote management policy.
By default, the system will only allow web access from the internal network.

Interface Layout

The main Web Interface page is divided into three major sections:

A. Menu bar

The menu bar located at the top of the Web Interface contains a number of
buttons and drop-down menus that are used to perform configuration tasks as
well as for navigation to various tools and status pages.

•

Home - Navigates to the first page of the Web Interface.

•

Configuration

i.

Save and Activate - Saves and activates the configuration.

ii.

Discard Changes - Discards any changes made to the configuration
during the current session.

iii.

View Changes - List the changes made to the configuration since it
was last saved.

•

Tools - Contains a number of tools that are useful for maintaining the
system.

•

Status - Provides various status pages that can be used for system
diagnostics.

2.1.3. The Web Interface

Chapter 2. Management and Maintenance

33

Summary of Contents for NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-1660

SonicWALL TZ270 Quick Start Manual preview
TZ270
Brand: SonicWALL Pages: 2
IBASE Technology FWA8800-NIC User Manual preview
FWA8800-NIC
Brand: IBASE Technology Pages: 69
ZyXEL Communications ZYWALL 2 WG User Manual preview
ZYWALL 2 WG
Brand: ZyXEL Communications Pages: 784
Fortinet FortiGate FortiGate-60M Administration Manual preview
FortiGate FortiGate-60M
Brand: Fortinet Pages: 376
3Com 3C16792 - OfficeConnect Dual Speed Switch 16 User Manual preview
3C16792 - OfficeConnect Dual Speed Switch 16
Brand: 3Com Pages: 40
Meraki MX67W Installation Manual preview
MX67W
Brand: Meraki Pages: 9
8e6 Technologies Enterprise Filter Authentication R3000 User Manual preview
Enterprise Filter Authentication R3000
Brand: 8e6 Technologies Pages: 594
Kerio Control NG100W Quick Start Manual preview
Control NG100W
Brand: Kerio Pages: 4

Brands by name

Popular brands

Load more brands