DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Installation and Connection
9. In the opened window, in the list of available wireless networks, select the wireless network
DAP-300P
and click the
Connect
button.
Figure 19. The list of available networks.
10. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) in the
Security key
field and click the
OK
button.
11. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
Now you can connect to the web-based interface of DAP-300P for configuring all needed
parameters. To gain access to an external network (to the Internet), you also need to specify the
default gateway and the addresses of DNS servers.
!
If you perform initial configuration of the access point via Wi-Fi connection, note that
immediately after changing the wireless default settings of the access point you will need
to reconfigure the wireless connection using the newly specified settings.
Page
32
of 175
