DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
In the opened window, specify the needed parameters:
Parameter
Description
Name
Specify a username for access from the SNMP manager.
Authentication protocol
Select a required authentication method from the drop-down list or
leave the
None
value if authentication is not required.
Authentication
password
Specify a password for user authentication from the SNMP manager.
The field is displayed if the
MD5
or
SHA
value is selected from the
Authentication protocol
drop-down list.
Encryption protocol
Select a required encryption method from the drop-down list or
leave the
None
value if encryption is not required. The list is
displayed if the
MD5
or
SHA
value is selected from the
Authentication protocol
drop-down list.
Encryption key
Specify an encryption key for data exchange between the SNMP
agent and SNMP manager. The field is displayed if the
DES
or
AES
value is selected from the
Encryption protocol
drop-down list.
MIB subtree
Specify a MIB element which will be available to the SNMP
manager.
Click the
SAVE
button.
To edit a user, select the relevant line in the table. In the opened window, change the needed values
and click the
SAVE
button. Then click the
APPLY
button.
To remove a user, select the checkbox located to the left of the relevant line in the table and click
the
DELETE
button (
). Then click the
APPLY
button.
Page
116
of 175
