DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
In the
Static IP Addresses
section, you can specify MAC address and IPv4 address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address). The access
point assigns IPv4 addresses in accordance with the specified pairs only when the DHCP server is
enabled (in the
Dynamic IP Addresses
section, the
DHCP server
value is selected from the
Mode of dynamic IP address assignment
drop-down list).
Figure 67. The section for creating MAC-IPv4 pairs.
To create a MAC-IPv4 pair, click the
ADD
button (
). In the opened window, in the
IP address
field, enter an IPv4 address which will be assigned to the device from the LAN, then in the
MAC
address
field, enter the MAC address of this device. In the
Hostname
field, specify a network
name of the device for easier identification (
optional
). Click the
APPLY
button.
In order to view MAC addresses of the devices connected to the access point at the moment, click
the
KNOWN CLIENTS
button. In the opened window, select the needed device and click the
OK
button. To view the latest list of the connected devices, click the
REFRESH
button.
To edit the settings for the existing MAC-IPv4 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the
APPLY
button.
To remove a MAC-IPv4 pair, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
). Then click the
APPLY
button. Also you can remove a MAC-
IPv4 pair in the editing window.
Page
76
of 175
