DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Installation and Connection
The
Device Information
section displays the model and hardware version of the access point, the
firmware version, and other data.
To contact the technical support group (to send an e-mail), left-click the support e-mail address.
After clicking the line, the e-mail client window for sending a new letter to the specified address
opens.
To change the operation mode of the device, left-click the name of the mode in the
Device mode
line. In the opened window, click the
initial setup wizard
link (for the detailed description of the
section, page 43).
The
Wi-Fi 2.4 GHz
section displays data on the state of the device's wireless network, its name and
the authentication type, and availability of an additional wireless network.
In the
WAN
section, data on the type and status of the existing WAN connection are displayed.
In the
LAN
section, the IPv4 and IPv6 address of the access point, the LAN MAC address, and the
number of wired and wireless clients of the device are displayed.
The
LAN Ports
section displays the state of the device's LAN port and its data transfer mode.
The
Yandex.DNS
section displays the Yandex.DNS
service state and operation mode. To enable
the Yandex.DNS
service, move the
Enable
switch to the right.
If needed, change the operation
mode of the service.
Page
39
of 175
