DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Redirect
This page is available if the
Router
or
WISP Repeater
mode was selected in the Initial
Configuration Wizard.
On the
Advanced / Redirect
page, you can enable notifications on the reason of the Internet
connection failure. Notifications will be displayed in the browser window when a user is attempting
to open a web site on the Internet.
Figure 108. The
Advanced / Redirect
page.
To configure notifications, in the
Common Settings
section, move the
Enable redirect
switch
to the right. Then, in the
Reasons for Redirect
section, move the needed switches to the right.
Parameter
Description
Reasons for Redirect
Physical connection
error
Notifications in case of physical connection problems (the ISP's
cable is not connected, an additional device needed to access the
Internet is not connected).
The device is not
configured
Notifications in case when the device works with default settings.
No connection
Notifications in case of problems of the default WAN connection
(authorization error, the IPS's server does not respond, etc.).
When you have configured the parameters, click the
APPLY
button.
To disable notifications, move the
Enable redirect
switch to the left and click the
APPLY
button.
Page
129
of 175
