DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Remote Update
!
Attention! Do not turn off the
access point
before the firmware update is completed. This
may cause the device breakdown.
To update the firmware of the access point remotely, follow the next steps:
1. On the
System / Firmware Update
page, in the
Remote Update
section, click the
CHECK FOR UPDATES
button to check if a newer firmware version exists.
2. Click the
UPDATE FIRMWARE
button (the button is displayed if a newer version of the
firmware is available).
3. Wait until the access point is rebooted (about one and a half or two minutes).
4. Log into the web-based interface using the login (
admin
) and the current password.
If after updating the firmware the access point doesn't work correctly, please restore the factory
default settings. To do this, click the
Factory
button on the
System / Configuration
page. Wait
until the access point is rebooted.
Page
156
of 175
