DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
IGMP
This page is available if the
Router
or
WISP Repeater
mode was selected in the Initial
Configuration Wizard.
On the
Advanced / IGMP
page, you can allow the access point to use IGMP.
IGMP is used for managing multicast traffic (transferring data to a group of destinations). This
protocol allows using network resources for some applications, e.g., for streaming video, more
efficiently.
Figure 117. The
Advanced / IGMP
page.
The following elements are available on the page:
Parameter
Description
Enable
Move the switch to the right to enable IGMP.
IGMP version
Select a version of IGMP from the drop-down list.
Interface
From the drop-down list, select a connection of the Dynamic IPv4 or
Static IPv4 type for which you need to allow multicast traffic (e.g.
streaming video).
After specifying the needed parameters, click the
APPLY
button.
Page
139
of 175
