DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter
Description
The contact information
for the administrator
Additional information used to contact the administrator of the
access point.
System location
Additional information used to locate the access point.
After specifying the needed parameters, click the
APPLY
button.
In order to disable the SNMP agent, in the
Configuration
section, move the
Enable SNMP
switch to the left and click the
APPLY
button.
If the SNMP manager operates over SNMPv2c, create a read-only community which will be used
by the SNMP manager to get data on the device. To do this, in the
Communities
section, click the
ADD
button and specify the community name in the line displayed. Then click the
APPLY
button.
To remove a community, click the
Delete
icon ( ) in the relevant line. Then click the
APPLY
button.
If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the
SNMP manager to get data on the device. To do this, in the
Users
section, click the
ADD
button (
).
Figure 97. The window for adding a user.
Page
115
of 175
