DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter
Description
Protocol
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Public Network Settings
Remote IP
Enter the IP address of the server from the external network.
To add one more IP address, click the
ADD REMOTE IP
button and
enter the address in the displayed line.
To remove the IP address, click the
Delete
icon ( ) in the line of
the address.
Public port (start)/
Public port (end)
A port of the access point from which traffic is directed to the IP
address specified in the
Private IP
field in the
Private Network
Settings
section. Specify the start and the end value for the port
range. If you need to specify one port, enter the needed value in the
Public port (start)
field and leave the
Public port (end)
field
blank.
Private Network Settings
Private IP
The IP address of the server from the local area network. To choose
a device connected to the access point's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically).
Private port (start)/
Private port (end)
A port of the IP address specified in the
Private IP
field to which
traffic is directed from the
Public port
. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the
Private port (start)
field and leave the
Private port (end)
field blank.
Click the
APPLY
button.
To edit the parameters of an existing server, select the relevant line in the table. On the opened page,
change the needed parameters and click the
APPLY
button.
To remove a server, select the checkbox located to the left of the relevant line of the table and click
the
DELETE
button (
). Also you can remove a server on the editing page.
Page
148
of 175
