DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Figure 95. The window for adding a rule for the MAC filter.
You can specify the following parameters:
Parameter
Description
SSID
A wireless network to which the rule will be applied. Select the
needed value from the drop-down list.
MAC address
In the field, enter the MAC address to which the selected filtering
mode will be applied.
Hostname
The name of the device for easier identification (
optional
). You can
specify any name.
Enable
If the switch is moved to the right, the rule is active.
Move the switch to the left to disable the rule.
When you have configured the parameters, click the
SAVE
button.
To edit the parameters of the existing rule, in the
Filters
section, left-click the needed rule. In the
opened window, change the settings and click the
SAVE
button.
To remove the rule from the page, in the
Filters
section, select the checkbox located to the left of
the relevant rule and click the
DELETE
button (
).
After creating the rules you need to configure the filtering modes.
To open the basic or additional wireless network for the devices which MAC addresses are
specified on this page and to close the wireless network for all other devices, in the
MAC Filter
section, left-click the line of the wireless network. In the opened window, move the
Enable MAC
filter
switch to the right. Upon that the
MAC filter restrict mode
drop-down list will be
displayed. Select the
Allow
value from the drop-down list and click the
SAVE
button.
To close the wireless network for the devices which MAC addresses are specified on this page,
select the
Deny
value from the
MAC filter restrict mode
drop-down list and click the
SAVE
button.
Page
112
of 175
