DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter
Description
Max associated clients
The maximum number of devices connected to the wireless network.
When the value
0
is specified, the device does not limit the number
of connected clients.
Broadcast wireless
network
If the switch is moved to the left, devices cannot connect to the
wireless network. Upon that the access point can connect to another
access point as a wireless client.
Clients isolation
Move the switch to the right to forbid wireless clients of this
wireless network to communicate to each other.
Enable guest network
This function is available for the additional network. Move the
switch to the right if you want the devices connected to the
additional network to be isolated from the devices and resources of
the access point's LAN.
In the
Security Settings
section, you can change security settings of the wireless network.
By default, the
WPA2-PSK
network authentication type of the wireless network is specified. WPS
PIN from the barcode label is used as the network key.
Figure 84. Network authentication types supported by the access point.
The access point supports the following authentication types:
Authentication type
Description
Open
Open authentication (with WEP encryption for wireless network
modes not supporting 802.11n devices).
WEP
Authentication with a shared key with WEP encryption. This
authentication type is not available when a mode supporting
802.11n devices is selected from the
Wireless mode
drop-down
list on the
Wi-Fi / Basic Settings
page.
WPA
WPA-based authentication using a RADIUS server.
Page
95
of 175
