DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
When the
Open
or
WEP
authentication type is selected, the following settings are displayed on the
page:
Parameter
Description
Enable encryption WEP
For
Open
authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the
Default key ID
drop-down list, the
Encryption key WEP as
HEX
switch, and four
Encryption key
fields are displayed on the
page.
Default key ID
The number of the key (from first to fourth) which will be used for
WEP encryption.
Encryption key WEP as
HEX
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Encryption key
(1-4)
Keys for WEP encryption. The access point uses the key selected
from the
Default key ID
drop-down list. It is required to specify all
the fields. Click the
Show
icon (
) to display the entered key.
When the
WPA-PSK
,
WPA2-PSK
, or
WPA-PSK/WPA2-PSK mixed
authentication type is
selected, the following fields are displayed:
Parameter
Description
Password PSK
A password for WPA encryption. Click the
Show
icon (
) to
display the entered key.
Encryption type
An encryption method:
TKIP
,
AES
, or
TKIP+AES
.
When you have configured the parameters, click the
APPLY
button.
When connecting to a wireless access point, the wireless channel of DAP-300P will switch to the
channel of the access point to which you have connected.
In addition, the
Connection Information
section in which you can view the connection status
and the network basic parameters is displayed.
If you want to connect to the WISP network, after configuring the device as a client, you need to
create a WAN connection with relevant parameters for the
WLAN
interface.
Page
107
of 175
