D-Link DAP-300P User Manual Download

Page: 15 / 175

DAP-300P

Wireless N300 PoE Access Point / Router

User Manual

Installation and Connection

Connecting to Mobile Device with D-Link Assistant Application

1. Connect the power adapter (not included in the delivery package) to the power connector

port on the back panel of the access point, then plug the power adapter into an electrical
outlet or power strip.

2. Make sure that the Wi-Fi connection on your mobile device is on. To switch it on, go to the

mobile device settings.

3. In the list of available wireless networks on your mobile device, select the wireless network

DAP-300P

4. In the opened window, enter the network key (see WPS PIN on the barcode label on the

bottom panel of the device) as the password and connect to the wireless network of DAP-
300P.

5. In the settings of the wireless network

DAP-300P

on your mobile device, in the

Settings

field, select the

Static

value (for Android) or the

Manual

value (for iOS).

6. Enter the value

192.168.0.51

in the

IP address

field. For iOS devices, also specify the

subnet mask

255.255.255.0

. Confirm the changed settings.

7. Launch D-Link Assistant application on your mobile device. The application is available for

Android and iPhone smartphones in AppStore and Google Play.

D-Link Assistant for Android

D-Link Assistant for iOS

1 Field names may vary in different versions of operating systems on mobile devices.

Page

of 175

Summary of Contents for DAP-300P
















































































































































































Search results

Summary of Contents for DAP-300P

Reviews:

Related manuals for DAP-300P

Brands by name

Popular brands

D-Link DAP-300P, User Manual

Search results

Summary of Contents for DAP-300P

Reviews:

Related manuals for DAP-300P

Brands by name

Popular brands