DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Selecting Operation Mode
In order to connect your device to a wired ISP, on the
Device mode
page, from the
Connection
method
list, select the
Wired connection
value. Then from the
Work mode
list select the
Router
value. In this mode you can configure a WAN connection, set your own settings for the
wireless network, configure the LAN port to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
Figure 36. Selecting an operation mode. The
Router
mode.
In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the
Device mode
page, from the
Connection method
list, select the
Wired
connection
value. Then from the
Work mode
list select the
Access point
value. In this mode
you can change the LAN IP address, set your own settings for the wireless network, and set your
own password for access to the web-based interface of the device.
Figure 37. Selecting an operation mode. The
Access point
mode.
Page
45
of 175
