DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter
Description
Option 82 Remote ID
The value of the Remote ID field of DHCP option 82 in accordance
with RFC3046.
Do not fill in the field unless your ISP or the administrator of the
external DHCP server provided this value.
When all needed settings are configured, click the
APPLY
button.
In the
DHCP Options
section, you can change default values for some options of DHCP protocol
(IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP
server should send to clients to configure the local network.
Figure 65. The section for configuring DHCP options.
To do this, click the
ADD
button (
).
Figure 66. The window for configuring a DHCP option.
In the opened window, you can specify the following parameters:
Parameter
Description
Known DHCP options
From the drop-down list, select an option which you want to
configure.
Options value
Specify the value for the selected option.
Force
Move the switch to the left to let the DHCP server send the selected
option only when the client requests it.
After specifying the needed parameters, click the
APPLY
button.
To edit the parameters of an option, left-click the relevant line in the table. In the opened window,
change the needed parameters and click the
APPLY
button.
To remove the value of an option, select the checkbox located to the left of the relevant line in the
table and click the
DELETE
button (
). Then click the
APPLY
button.
Page
75
of 175
