DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
VLAN
This page is available if the
Router
or
WISP Repeater
mode was selected in the Initial
Configuration Wizard.
On the
Advanced / VLAN
page, you can edit existing and create new virtual networks (VLAN),
e.g., for distinguishing traffic or specifying additional WAN interfaces.
By default, 2 VLANs are created in the access point's system:
•
lan
: for the LAN interface, it includes the LAN port and Wi-Fi networks. You cannot delete
this VLAN.
•
wan
: or the WAN interface; it includes the
WAN (PoE)
port. You can edit or delete this
VLAN.
Figure 104. The
Advanced / VLAN
page.
If you want to create a VLAN including the LAN port or available Wi-Fi networks of the access
point, first delete relevant records from the
lan
network on this page. To do this, select the
lan
line.
On the opened page, in the
Untagged Ports
section, deselect the checkbox located to the left of
the relevant element, and click the
APPLY
button.
Page
124
of 175
